Assembly
4.3.7 NSE-T3 138-V1, NSE-T3 138-V1-K, NSE-T3 138-V4, NSE-T3 138-V4-
K
Fastening in the installation space with 6 M8 screws.
The assembly module can be positioned by means of two
centering diameters of the installation space:
Ø 110 H6
in the lower range. For partial and full installation.
Ø 138 H6
in the upper range.
The exact position orientation is done with a cylindrical pin with a
diameter of Ø 6 M6 x 11 mm. Precise alignment and positioning of
the quick-change pallet system requires precise positioning of
fitting hole Ø 6 F7 in the mounting position on the opposite side.
The air connection is normally made via the bottom coupling holes
in the collar of the housing of the unit.
Hose-free direct connection
(seal Ø 9 x 1.5)
Installation type:
full installation
Detaching /
forcing thread
M10 x 10
Slot for position
orientation and torque
transmission
Unlocking connection ← →
Turbo connection → ←
Fastening screw for
cylindrical screw M8
Installation situation:
partial installation
Cylindrical pin for position orientation
of the quick-change pallet module
* All clamping systems of
equal height within 0.02 mm
** Measure of clearance
for cylindrical pin
*** Measure of clearance for IXB V1
5
33
08.00 | NSE3 138, NSE-T3 138 | VERO-S quick-change pallet system | en |
1152197 -NSE3 NSE-T3
