Assembly
04.00|1411420_NSE mini 90-25, NSE mini 90-25-V10 |en
27
Screw tightening torques
DANGER
Risk of screw failure due to the use of screws of a lower strength
class than specified. In the event of a screw failure, the cover
under spring force can be ejected. A failure of the clamping pin
mounting screw can cause the object to be clamped to fall
down.
•
Only screws of the strength class specified in the operating
manual may be used. Observe the tightening torques.
•
Wear personal protective equipment (safety shoes).
Tightening torques for mounting the clamping modules and
clamping pins
(Screw quality 12.9)
Screw size
M4
M6
M8
Tightening torques (Nm)
5
15
32
Tightening torques for mounting indexing pin and clamping
module cover
(screw quality 010.9)
Screw size
M3
M5
Tightening torques (Nm)
1
5
4.5
