SCHUNK VERO-S NSE-A3 138, Assembly And Operating Manual

Page: 37 / 50

Function
02.00|1376941_NSE-A3 |en 37
Function
The item numbers specified for the corresponding individual
components relate to chapter drawings.
(

10, Page 46)
KVS3 138 cone seal
The quick-change pallet system is equipped with a cone seal to
protect the change interface. The sealing unit can be spring-loaded
and reset when the module is unlocked.
The change interface is sealed when the clamping module is closed
without clamping pins. On the floor, the cone seal has an air
connection to actuate a cleaning or air purge function.
Note
The blow-out function must be actuated with the clamping module
closed without clamping pins. In this case, the blow-out air is
discharged at the sealing position and in so doing blows coolant
and chips from the bearing surface During the loading process, the
quick-change pallet system should be supplied with blow-out air
before unlocking.
Note
If several clamping modules with a cone seal are fitted in one
clamping station, the loading weight of the clamping pallet or the
device to be installed must be appropriate to prevent the any
lifting away.
Cone seal force: 30 N
5
5.1