Basic safety notes
8
01.00 | | TOOLFIX modular tool mounting device | en | 1510829
2.5 Ambient conditions and operating conditions
Required ambient conditions and operating conditions
Incorrect ambient and operating conditions can make the product
unsafe, leading to the risk of serious injuries, considerable material
damage and/or a significant reduction in the product's life span.
• Make sure that the product is only used within its defined
application parameters.
• Ensure that the product is of a sufficient size for the workpiece.
• Ensure that the insertion surfaces of the tool adapters are
always clean. Always ensure that no chips of any kind enter the
insertion surfaces.
2.6 Personnel qualifications
Any work on the product by inadequately qualified personnel can
lead to serious injuries and considerable material damage.
• All work must only be performed by appropriately qualified
personnel.
• Personnel must have read and understood the complete
manual before beginning any work on the product.
• Observe country-specific accident prevention regulations and
the general safety notes.
The following personnel qualifications are required for the various
activities on the product:
Specialist personnel:
Specialist personnel have the specialized training, knowledge, and
experience to perform the tasks entrusted to them, to recognize
and avoid potential dangers, and know the relevant standards and
regulations.
Instructed person:
Instructed persons have been instructed by the operator regarding
the tasks entrusted to them and the potential dangers of
inappropriate behavior.
Manufacturer's service personnel:
The manufacturer's service personnel have the specialized
training, knowledge, and experience to perform the work
entrusted to them and to recognize and avoid potential dangers.
