Basic safety notes
2 Basic safety notes
2.1 Appropriate use
The TOOLFIX system series is intended for installing toolholder
mountings for cutting machines at industrial workplaces for the
purpose of maintenance or service work on the toolholder
mounting or changing the tool or indexable cutter inserts clamped
in the mounting.
• The products may only be used within the scope of their
technical application
• The products are intended for industrial applications.
• Appropriate use of the product includes compliance with all
instructions in this manual.
2.2 Inappropriate use
TOOLFIX tool mounting devices are being used inappropriately, for
example, if:
• they are used as a clamping device, toolholder, load-handling
device or as lifting equipment.
• toolholder tapers are fixed for the purpose of machining.
• they are used in working environments that are not permissible.
• the technical data specified by the manufacturer are exceeded
during usage.
2.3 Structural changes
Implementation of structural changes
Modifications, changes or reworking, e.g. additional threads,
holes, or safety devices, can damage the product or impair its
functionality or safety.
• Structural changes may only be implemented with the written
approval of SCHUNK.
2.4 Spare parts
Use of unauthorized spare parts
Using unauthorized spare parts can endanger personnel and
damage the product or cause it to malfunction.
• Only use original spare parts and spares authorized by SCHUNK.
7
01.00 | | TOOLFIX modular tool mounting device | en | 1510829
