20 – en
WARNING
Risk of injury from ejected parts if it is used inappropriately, if it is used with
extensions and longer, overhanging or heavy tools, or if the minimum clamping depth
is not observed.
Ø
Protective covers in accordance with EC Machinery Directive must be used.
Ø
Comply with the values of the technical data.
Ø
The maximum speed has to be reduced, if longer, overhanging or heavy tools are used. The
amount of reduction can only be defined on an individual basis and is within the responsibility
of the user.
Ø
Observe the minimum clamping depth.
2.4 Notes on safe operation
Assembly and disassembly, commissioning and clamping tools may be performed only by
qualified specialist personnel.
Never heat a SCHUNK TENDO hydraulic expansion toolholder on a shrinking device!
