Assembly
18
02.00 | TCU-Z | Assembly and operating manual | en | 389464
4.4.1 Mounting the programmable magnetic switch (MMS-P)
CAUTION
Risk of damage to the sensor during assembly!
•
Observe the maximal tightening torque.
NOTE
If there is no T-nut available, slide the sensor according to
dimension I1 into the groove (2), see following table.
Ø
Turn the sensor (1) into the groove (2).
OR: Slide the sensor (1) into the groove (2) until the sensor (1)
stops at the T-nut (3).
Ø
Secure the sensor (1) using the set-screw (4).
Tightening torque: 10 Ncm
Ø
Adjust sensor (1), see sensor assembly and operating manual.
Setting dimensions
TCU-Z
50
64
80
100
125
160
200
Dimension I
1
[mm]
-
40.9 48.9 58.9 71.4 88.9 108.9
