Sealing kits, accessory kits and parts lists
8 Sealing kits, accessory kits and parts lists
When ordering spare parts, the type
, size and, if possible, the serial number of the
clamping force block must always be stated to avoid delivery
mistakes.
Seals, sealing elements, fittings, springs, bearings, screws, wiper
bars and parts that come into contact with the workpiece are not
covered by the warranty.
8.1 Sealing kit lists
There are two sealing kits. One for the piston chamber (piston
chamber sealing kit) and one for the pneumatic monitoring
(monitoring sealing kit). The sealing elements for the bottom
connections are included in both sealing kits.
For spring-actuated clamping force blocks (KSF3), only the
monitoring/connection sealing kit provided by the customer is
relevant.
8.1.1 Piston chamber sealing kit
The piston chamber seals should only be replaced by SCHUNK!
Danger to life in case of improper disassembly.
The sealing kit for the piston chamber contains all seals and
wearing parts for the parts installed inside (e.g. cylinder pistons).
Sealing kit *
ID
Size 64
1463219
Size 100
1470645
Size 140
1470642
Size 160
1470647
Size 200
1508677
Size 250
1470648
Size 315
1508678
* For included items, see column > y < in the Parts List chapter
below.
The sealing kit can only be ordered as a compete kit.
37
05.00 | KSF3, KSF3-LH, KSF3-F | TANDEM Clamping Force Block | en | 1467140
