Product Overview
14
01.00|SWS-001 |en
Quick-Change Adapter SWA
The SWA quick-change adapter is made of an anodized aluminum
body. Harden stainless-steel alignment locking posts provide relia-
ble and repeatable coupling of the SWA. An end-effector can be
mounted with mounting holes on the bottom of the SWA.
The SWA is equipped with four M5 x 0.8 ports for pass through air
only and is equipped with four M5 elbow fittings for 6mm diame-
ter tubing. The SWA has two mounting pockets that support op-
tional modules for electrical or other pass-through connections.
Grooves are provided for interfacing with an optional tool stand.
A dowel pin on the SWA aligns with a pocket in the master plate to
ensure proper coupling orientation.
quick-change adapter SWA
5.2
Summary of Contents for SWS-001
