Assembly
01.01|Ident.-Nr. 30074722|en
15
NOTE
• For attachment from behind or lateral fix the modular unit with
the locating holes intended for this purpose.
• Secure the module unit with the securing holes intended for
this purpose.
• Secure the top jaws with the securing holes intended for this
purpose.
NOTICE
Magnetic fields and magnetisable materials can disturb the
monitoring by proximity switches. Only use screws made of
stainless steel for fastening the grippers (non-magnetisable
screws). Fastening plates, fixing brackets etc. should not be
made out of non-magnetisable materials such as aluminium or
plastics.
Air connection
WARNING
Risk of injury when the machine/system moves unexpectedly!
Switch off power supply.
NOTICE
Damage to the gripper is possible!
If the maximum permissible finger weight or the permissible mass
moment of inertia of the fingers is exceeded, the gripper can be
damaged.
• A jaw movement always has to be without jerks and bounce.
• You must therefore implement sufficient reduction and/or
damping.
• Observe the diagrams and information in the catalog data
sheet.
7.2
