Operation
38
03.00|Clamping device SVP-Mini auto/SVP-RM auto|en
Analysis software
The analysis software displays device-specific data, saves and reads
process-specific data such as clamping pressure set points and trans-
fers them in order to operate the pump. Furthermore, firmware can
be updated.
Installing the analysis software
System requirements
Operating system:
Windows 2000, Windows XP,
Windows Vista, Windows 7
CPU:
Pentium 4, minimum 1.7 GHz
Working memory:
1 GB or more
Hard drive:
1 GB
Screen resolution:
1024 x 768 or higher, 65.535 or
more colors
1 Download and install the analysis software as ZIP file in the
download area of the SCHUNK homepage (
Service → downloads
→ 3. Tool
-
holding and Workholding → Tribos SVP
-4
).
2 Connect the pump to a PC via USB interface.
The pump is detected automatically.
6.5
6.5.1
