manualshive.com logo in svg

SCHUNK SVH, Assembly And Operating Manual, Page: 24 / 32

Share
Download
SCHUNK SVH Assembly And Operating Manual Download Page 24

Assembly and installation

24

02.00 | SVH | Assembly and Operating Manual | en | 389734

5.4 Mounting to a robot or moving unit

 CAUTION

Risk of injury due to the workpiece falling!

In the event of a power failure or incorrect gripping process, the
gripped workpiece may fall.

•

Ensure that the gripping process is performed correctly with a
suitable gripping force.

•

Keep distance.

•

Wear safety boots.

 CAUTION

Risk of injury if the 5-finger gripping hand is torn from the robot
arm or moving unit!

If the mounting process has not been performed properly, the 5‐
finger gripping hand may come loose from the robot arm.

•

Mount the flat change system properly.

•

Tighten the lateral cylindrical screw to the clamping ring with a
spanner wrench.

Using the flat change system, the gripping hand can be mounted
on an external robot arm.

Connection to the flat change system

1

Supply voltage 24VDC on
soldering surfaces

3

RS485/USB interface
converter ("Brainbox")

2

Flat change system

4

USB isolator

JST

JST plug connector

Summary of Contents for SVH

































Reviews:

No comments