Translation of original EC declaration of incorporation
76
05/STM-48V/en/2011-04-01/CW
17
Translation of original EC declaration of
incorporation
In terms of the EC Machinery Directive 2006/42/EC, annex II B
Manufacturer/
distributor
SCHUNK GmbH & Co. KG.
Spann- und Greiftechnik
Bahnhofstr. 106
– 134
D-74348 Lauffen/Neckar, Germany
We hereby declare that the following product:
Product designation:
Electrical Rotary Module
Type designation:
STM 135 / STM 170 / STM 210
ID-number:
0306800…0306808 / 0306810…0306818
/0306820…0306828
meets the applicable basic requirements of the Directive Machinery (2006/42/EC).
The incomplete machine may not be put into operation until conformity of the machine into
which the incomplete machine is to be installed with the provisions of the Machinery Directive
(2006/42/EC) is confirmed.
Applied harmonized standards, especially:
EN ISO 12100-1
Safety of machines - Basic terminology, general design
guidelines - Part 1: Basic terminology, methodology (ISO
12100-1:2003)
EN ISO 12100-2
Safety of machines - Basic terminology, general design
guidelines - Part 2: Technical guidelines (ISO 12100-
2:2003)
EN ISO 9409-1:2004
Industrial robots - Mechanical interfaces - Part 1: Plates
(ISO 9409-1:2004); German version EN ISO 9409-1:2004
The manufacturer agrees to forward on demand the special technical documents for the in-
complete machine to state offices.
The special technical documents according to Annex VII, Part B, belonging to the incomplete
machine have been created.
Person responsible for documentation: Mr. Michael Eckert, Tel.: +49(0)7133/103-2204
Location, date/signature:
Lauffen, January 2011
p.p.
Title of the signatory
Director for Development
