Maintenance, size 16 - 40
112
12.00 | SRM | Assembly and Operating Manual | en | 1346850
10.2 Lubricants/Lubrication points (basic lubrication)
WARNING
Risk of injury due to contact with lubricants!
Lubricant may cause irritation and allergic reactions if it contacts
the skin or eyes.
•
Avoid contact between lubricant and skin or eyes.
•
Wear safety goggles and protective gloves.
•
Observe information on the safety data sheet of the lubricant.
SCHUNK recommends the lubricants listed.
During maintenance, treat all greased areas with lubricant. Thinly
apply lubricant with a lint-free cloth.
Lubricant point
Lubricant
The teeth and the pinion
Toothgood 1
All seals
Sealgood 1
10.3 Inspect and set shock absorbers
10.3.1 Inspect shock absorbers
The shock absorbers are specially tested and can only be acquired
from SCHUNK. The shock absorbers have a limited lifespan,
depending on the load.
•
Regulary check that the shock absorbers are working.
✓
The shock absorber is working correctly if the product
moves softly into the end positions when set correctly and
the prescribed swiveling time is reached.
10.3.2 Set shock absorber overhang
For production reasons, shock absorbers may be of different sizes.
If a shock absorber is exchanged, the new shock absorber with
fitting disks must be set to the corresponding shock absorber
overhang (h).
Summary of Contents for SRM 10
Page 135: ......
