manualshive.com logo in svg

SCHUNK SRM 10, Assembly And Operating Manual

Share
Download
SCHUNK SRM 10 Assembly And Operating Manual Download Page 10

General

10

12.00 | SRM | Assembly and Operating Manual | en | 1346850

1.4 Accessories

A wide range of accessories are available for this product
For information regarding which accessory articles can be used
with the corresponding product variants, see catalog data sheet.

1.4.1 Spare parts packages

Spare parts packages allow for the maintenance and repair of
individual components. For information on the range of the spare
parts packages, see www.schunk.com > Service.
The following spare parts packages are available for this product:
• Spare part package "Sealing kit"
• Spare part package "Shock absorber"

Seal kit

Size

ID number

Base unit

ID number

Base unit with

center position

(M)

ID number
Fluid feed-

through (MDF)

SRM 10

1407715

1483913

-

SRM 12

1407662

1483920

-

SRM 14

1346995

1483924

-

SRM 16

1346986

1483926

1346989

SRM 20

1457853

1490555

1457856

SRM 25

1346971

1483929

1346977

SRM 32

1405116

1483945

1405121

SRM 40

1346937

1483954

1346946

Shock absorber

Size

ID number

Base unit

ID number

with external stop (X)

SRM 10

1407726

1407727

SRM 12

1407664

1407665

SRM 14

1346992

1346998

SRM 16

1346980

-

SRM 20

1457861

-

SRM 25

1346959

-

SRM 32

1405125

-

SRM 40

1346927

-

Summary of Contents for SRM 10









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands