SCHUNK SFL 25 Series, Assembly And Operating Manual

Page: 18 / 44

Assembly
18
05.00 | SFL | Assembly and operating manual | en | 389398
Ø
Screw the swivel unit and the machine/system laterally or on
the bottom together,
Mechanical connection [
}
19].
✓
If necessary, use suitable connection elements e.g. adapter
plates, design suggestion adapter plate,
Design suggestion
for adapter plate [
}
22].
✓
For securely transfering transverse forces and positioning the
swivel unit, use centring sleeve of the accessory pack.
✓
Observe the maximal tightening torque, admissible screw-in
depth and, if necessary, strength class.
Ø
Fasten the customer-specific attachment part to the turntable
using two screws and two cylindrical pins,
Mechanical
connection [
}
19].
✓
Observe the maximal tightening torque, admissible screw-in
depth and, if necessary, strength class.
Ø
Do only open the required air connections (main air connection
or direct connection),
Pneumatic connection [
}
21].
Ø
Connect the supply lines to the main air connections "A" and "B".
✓
Screw on the air connections. OR: Screw on the throttle valve
in order to provide sufficient throttling and/or damping.
Ø
OR: Connect the swivel unit via the hose-free direct connection.
✓
Use the O-rings from the accessory pack.
✓
Seal air connections not required using the locking screws
from the accessory pack.
Ø
Check opening and closing intervals, Adjusting the swivel angle
[
}
23].
Ø
Adjust the end positions, Adjusting the swivel angle [ } 23].
Ø
Mount the sensor, Mounting the sensor [
}
27].