Technical data
04.00|ROTA FSW |en
17
Technical data
Type ROTA FSW
220-A8
290-A11
400-A15
ID no.
0824200
0824300
0824400
Tightening torque [Nm]
100
150
200
Max. actuating force [kN]
70
133
140
Max. speed of rotation [rpm]
6000
4200
3500
Weight without adapter [kg]
10
20
51
Operating temperature [°C]
15 - 60
Maximum number of clamping cycles of the flexi-
ble adapter and the draw tube adapter.
250.000
Maximum number of clamping equipment chang-
es of the flexible adapter and the draw tube
adapter
5,000
The maximum permissible actuating force and the maximum per-
missible RPM for special machining must be calculated by the user
based on the permitted data of the ROTA FSW chuck quick-change
and the mounted clamping device or toolholder.
Precision classes
Tolerances for axial and radial run-out accuracy correspond to the
Technical Supply Terms per DIN ISO 3089.
Permissible imbalance
The ROTA FSW/bayonet in ungreased state without a substituted-
in lathe chuck corresponds to the balancing quality class 6.3
(according to DIN ISO 21940-11). Residual imbalance risks may
arise due to insufficient rotation compensation being achieved
(see DIN EN 1550 6.2 e). This applies particularly to high speeds,
asymmetrical workpieces or the use of lathe chucks that do not
correspond to balancing grade 6.3, as well as uneven application
of lubricants. In order to prevent damage resulting from these
residual risks, the entire rotor is to be dynamically balanced in ac-
cordance with DIN ISO 21940-11.
3
3.1
3.2
