Maintenance
7 Maintenance
7.1 Notes
Original spare parts
Use only original spare parts of SCHUNK when replacing spare and
wear parts.
Replacement of the housing and base jaws
The base jaws and the guides in the housing are matched to each
other. To replace these parts, send the product to SCHUNK with a
repair order.
7.2 Maintenance and lubrication intervals
CAUTION
Material damage due to hardening lubricants!
Lubricants harden more quickly at temperatures above 60°C,
leading to possible product damage.
•
Reduce the lubricant intervals accordingly.
Maintenance- and lubrication interval
Size
20 / 30
50 / 75
Interval [Mio. cycles]
5
2
7.3 Lubricants/Lubrication points
SCHUNK recommends the lubricants listed.
During maintenance, treat all greased areas with lubricant. Thinly
apply lubricant with a lint-free cloth.
Lubricant point
Lubricant
Metallic sliding surfaces
Toothgood 1
All seals
Sealgood 1
Bore hole at the piston
Sealgood 1
35
06.00 | PZH-plus | Assembly and Operating Manual | en | 389504
Summary of Contents for PZH-plus
Page 1: ...Original operating manual Assembly and Operating Manual PZH plus 3 finger centric gripper ...
Page 45: ......
Page 46: ......
Page 47: ......
