Assembly
20
08.00 | PZB-plus | Assembly and Operating Manual | en | 389366
5.2 Connections
5.2.1 Mechanical connection
Evenness of the
mounting surface
The values apply to the whole mounting surface to which the
product is mounted.
Requirements for evenness of the mounting surface (Dimensions in mm)
Edge length
Permissible unevenness
< 100
< 0.02
> 100
< 0.05
Requirements for
customer adapter
plates
If the adapter plate has bores or recesses and therefore the
product is not fully flush, the minimum support surface must be
adhered to. The recess/bore in the adapter plate may not exceed
the dimension "A"; for dimensions, see the following table.
The product can be assembled from two sides.
Connections at the
housing and on the
base jaws
Assembly options
Mounting material
Item Mounting
PZB-plus
50
64
80 100
125
160
200
240
300
Mounting the product from the front (side A)
1
Mounting screw (3 x)
M3
M5 M6 M6
M8
M8
M10 M12 M16
Mounting the product from the rear (side B)
