SCHUNK PZB-plus 100, Assembly And Operating Manual

Page: 4 / 52

Table of Contents
4
08.00 | PZB-plus | Assembly and Operating Manual | en | 389366
5.2.2 Pneumatic connection............................................................................ 22
5.3 Mounting the sensor .......................................................................................... 24
5.3.1
Overview of sensors ............................................................................... 24
5.3.2 Switch-off hysteresis for magnetic switches .......................................... 25
5.3.3 Turn control cam .................................................................................... 25
5.3.4 Setting dimensions ................................................................................. 26
5.3.5 Mounting MMS 22 magnetic switch....................................................... 27
5.3.6 Mounting MMS 22-PI1 programmable magnetic switch........................ 28
5.3.7 Mounting programmable MMS 22-PI2 magnetic switch........................ 29
5.3.8 Mounting programmable MMS-P 22 magnetic switch........................... 30
5.3.9 Mounting the reed switch RMS 80 ......................................................... 31
5.3.10 Mounting inductive proximity switch IN 80 ........................................... 33
5.3.11 Mounting flexible position sensor FPS ................................................... 35
5.3.12 Mounting the analog position sensor APS-M1 ....................................... 36
5.3.13 Mounting the analog position sensor APS-Z80....................................... 37
5.3.14 Mounting the radio system RSS-R1/T2................................................... 39
5.3.15 Mounting FMS force-measuring jaw ...................................................... 39
6 Troubleshooting ..................................................................................................... 40
6.1 Product does not move ...................................................................................... 40
6.2 Product is not executing the complete stroke ................................................... 40
6.3 Product is opening or closing abruptly ............................................................... 40
6.4 Gripping force is dropping .................................................................................. 41
6.5 Product does not achieve the opening and closing times .................................. 41
6.6 Programmable magnetic switches not switching as desired.............................. 41
7 Maintenance .......................................................................................................... 42
7.1 Notes .................................................................................................................. 42
7.2 Maintenance intervals........................................................................................ 42
7.3 Lubricants/Lubrication points............................................................................. 43
7.4 Disassembly and assembly ................................................................................. 43
7.4.1
Version without gripping force maintenance......................................... 43
7.4.2 Version with gripping force maintenance "I.D. gripping"....................... 44
7.4.3 Version with gripping force maintenance I.D. ........................................ 45
7.5 Notes for assembly ............................................................................................. 45
7.6 Screw tightening torques ................................................................................... 45
8 Assembly drawing................................................................................................... 46
9 Translation of original declaration of incorporation ................................................ 48
10 Annex to Declaration of Incorporation .................................................................... 49