SCHUNK PZB-plus 100, Assembly And Operating Manual

Page: 24 / 52

Assembly
24
08.00 | PZB-plus | Assembly and Operating Manual | en | 389366
5.3 Mounting the sensor
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
The product is prepared for the use of sensors.
• For the exact type designations of suitable sensors, please see
catalog datasheet and Overview of sensors [
}
24].
• For technical data for the suitable sensors, see assembly and
operating manual and catalog datasheet.
– The assembly and operating manual and catalog datasheet
are included in the scope of delivery for the sensors and are
available at schunk.com.
• Information on handling sensors is available at schunk.com or
from SCHUNK contact persons.
5.3.1 Overview of sensors
Designation PZB-plus
50 64 80 100 125 160 200 240 300
Magnetic switch MMS 22 X X X X X X X X X
Programmable magnetic switch MMS 22-
PI1 X X X X X X X X X
Programmable magnetic switch MMS 22-
PI2 X X X X X X X
Programmable magnetic switch
MMS-P 22 X X X X X X X
Reed switch RMS 80 X X X X X X X
Inductive proximity switch IN 80 X X X X X X X
Flexible position sensor FPS-S M8 X X X X X X X
Analog position sensor APS-M1 X X X X X X X
Analog position sensor APS-Z80 X X X X X X X
Radio system RSS R1/T2 with Reed switch
RMS 80 X X X X X
Force-measuring jaw FMS X X X X X X X