Maintenance
09.00 | PWG-plus | Assembly and operating manual | en | 389495
35
7 Maintenance
7.1 Notes
WARNING
Risk of burns through contact with hot surfaces!
Surfaces of components can heat up severely during operation.
Skin contact with hot surfaces causes severe burns to the skin.
•
For all work in the vicinity of hot surfaces, wear safety gloves.
•
Before carrying out any work, make sure that all surfaces have
cooled down to the ambient temperature.
Original spare parts
Use only original spare parts of SCHUNK when replacing spare and
wear parts.
Maintenance of module with gripping force maintenance "A.D.
gripping" (A.D.)
The pistons have to be aligned using an assembly device.
Therefore we recommend to have the module serviced and the
seals replaced by SCHUNK.
If this is not possible, you can carry out the maintenance and
replace the seals yourself.
7.2 Maintenance and lubrication intervals
CAUTION
Material damage due to hardening lubricants!
Lubricants harden more quickly at temperatures above 60°C,
leading to possible product damage.
•
Reduce the lubricant intervals accordingly.
Maintenance- and lubrication interval
Designation
PWG-plus
50 - 100
125 - 240
Interval [Mio. cycles]
6
4
