Assembly
10.00 | PSH | Assembly and operating manual | en | 389331
19
5.2 Connections
5.2.1 Mechanical connection
Evenness of the
mounting surface
The values apply to the whole mounting surface to which the
product is mounted.
Requirements for evenness of the mounting surface (Dimensions in mm)
Edge length
Permissible unevenness
< 100
< 0.02
> 100
< 0.05
Metric version
Possible assemblies, metric version
*) Contained in accessory pack.
NOTE
When selecting the fastening screws, observe the values
prescribed by SCHUNK, see following table.
Item Mounting
PSH
22
32
42
52
Connections to the housing (securing the product on the side)
1
Screw
M5
M6
M8
M10
Max. depth of engagement from
locating surface [mm]
10
13
15
20
Connections to the housing (securing the product from above)
3
Screw
M5
M6
M8
M10
Max. depth of engagement from
locating surface [mm]
10
13
15
15
Connections to the base jaws (connecting the gripper fingers)
5
Screw
M5
M6
M8
M10
Max. depth of engagement from
locating surface [mm]
13
16
17
21