SCHUNK PRG 100, Assembly And Operating Manual

Page: 42 / 48

Maintenance
42
08.00 | PRG | Assembly and Operating Manual | en | 389325
6.6 Servicing and assembling the product
Maintenance
• Clean all parts thoroughly and check for damage and wear.
• Treat all greased areas with lubricant.
Lubricants/Lubrication points [
}
38]
• Oil or grease bare external steel parts.
• Replace all wear parts / seals.
– Position of the wearing parts Drawings [
}
43]
– Seal kit Seal kit [ } 8]
Assembly Assembly takes place in the opposite order to disassembly.
Observe the following:
• Unless otherwise specified, secure all screws and nuts with
Loctite no. 243 and tighten with the appropriate tightening
torque.
6.6.1 Screw tightening torques
Position of the item numbers Drawings [
}
43]
Dimensions in Nm
Item PRG 26 PRG 34 PRG 42 PRG 52 PRG 64 PRG 80 PRG 100 PRG 125
6 1.3 1.3 3.0 5.9 1.01 10.1 20.0 24.6
16 0.25 0.4 0.7 2.0 4.0 -
17 0.3 0.5
18 - 3.0 6.1 6.1
20 0.8 0.8 2.4 7.5 7.5 7.5 10.0 25.0
22 0.8 1.3 3.0 5.9 10.1 10.1 24.6 24.6
83 0.75 -
13.1
13.2 0.3