Assembly
20
09.00 | NSR maxi 220 / PKL maxi 220 | VERO-S robot coupling for pallet
handling | en | 0489051
6.3 Mounting and Connection
Request our installation drawings if doing the installation
yourself.
The NSR maxi 220 is fixed in the installation space with 8 x M12
screws (see illustration). The screws must be tightened with the
specified torque
.
Positioning in the installation space is done using the centering
diameter Ø 172. A mounting screw is designed as a fitting screw
for precise alignment. Precise alignment and positioning of the
quick-change pallet system requires that the fitting bores Ø 14 H7
on the opposite side are precisely positioned in the mounting
position.
The inductive position measuring system is completely installed on
the quick-change pallet system and preset for monitoring the
OPENED and CLAMPED positions.
NOTE:
Detaching threads facilitate the removal of the modules from the
modules for stationary use / application (see illustration
"Mounting and connections").
Cylinder
screw (7 x)
Customer-specific robot flange
Fitting screw for position orientation (1 x )
(fitting
length 9)
Mounting
