Assembly
34
02.00|NSL3 turn 450-3, 450-3-Z, 570-5, 570-5-Z |en
*
The length of the screwed thread must not exceed the dimension "G" under any
circumstances!
Tightening torques for mounting clamping pins
(screw quality 12.9)
Screw size
M6
M8
M10
M12
M14
M16
Tightening torque (Nm)
15
32
62
108
170
262
For heavy devices or clamping pallets, the clamping pins with
mounting screws must be screwed with at least M12 thread.
Information to clamping pin SPG 40
The SPG 40 clamping pin can be used in conjunction with a
clamping pallet without centering taper in the turning center on
the clamping area of the fitted SPA 40.
With several clamping positions of a clamping pallet, without
centering taper in the turning center, all three types of clamping
pins can be replaced with the SPG 40.
The repeat accuracy increases to < 0.002 mm when using the SPG
40.
When connecting the screws from above, an M12 screw 10 mm
longer of strength class 12.9 must be used after order of
preference 2.
To avoid imbalance, all fastening screws and connection bore
holes on the clamping pallet should be identical.
Use and arrangement of the different clamping pin types
Depending on the clamping station used, different clamping
pallets are provided. In order to achieve the maximum centering
accuracy for the pallets, it is essential that the clamping pins be
arranged as specified in the illustrations.
4.5.1
4.5.2
