Assembly
01.00|1343374_MES3 / MEQ3 / MEW3 |en
25
with two fitting grooves for positional alignment of the clamping
pallet or for the use of a clamping membrane type SPM plus 138.
MES3 120-1
MES3 120-2, MES3 150-2
The module height extension can be mounted on VERO-S NSE 138
quick-change pallet modules via two zero point interchangeable
interfaces. The position of the module height extension is aligned
via the clamping pins, which specify an exact clamping direction.
Installation is possible on a VERO-S clamping station or a VERO-S
tombstone with a gauge distance of two clamping modules of 200
mm.
The clamping system has one air connection G1/8" for unlocking
the clamping module and one air connection G1/8" for the turbo
function. Supply is via the sealing nipple for quick locking coupling
size NW 7.4, type VSK Ø10-NW7.4 (accessory). The workpiece-side
interchangeable interface of the module height extension is
4.2.2
Summary of Contents for MEQ3 200-2
