SCHUNK LDN-DG-0600, Assembly And Operating Manual

Page: 86 / 146

Basic safety notes
84 04.00|LDN |en
Notes on particular risks
Generally valid:
• Remove the energy supplies before installation, modification,
maintenance, or adjustment work.
• Make sure that no residual energy remains in the system.
• Do not move parts by hand when the energy supply is connected.
• Do not reach into the open mechanism or the movement area
of the unit.
• Perform maintenance, modifications, and additions outside the
danger zone.
• Secure the product during all operations against uncontrolled
activation.
• Take a precautionary approach by maintenance and disassembly.
• Only specially trained staff should disassemble the product.
• In the event of a power failure, uncontrolled movements may
occur.
• Expect faulty drive movements especially if the installed moni-
toring devices are not yet effective.
• Check that product for transport damage.
WARNING
Risk of injury when the machine/system moves unexpectedly
due to the moving of the axes.
Remove the energy supplies before starting with assembly and
adjustments.
Make sure, that no residual energy remains in the system.
WARNING
Risk of injury from objects falling and being ejected
• The danger zone must be surrounded by a safety fence during
operation.
2.8