_________________________________________________________________________________________
XND.00041.002_B – 05/2022
30
Operation (standard operation)
4
Clamping / aligning
4.1
The basic version has countersunk holes for screwing the
KSX-C2 from the top with cylinder screw M12 on the T-
slot tables with a pitch of 100 mm.
The KSX-C2 can also be clamped with clamping claws.
Important:
Up to a base plate length of 500 mm, ensure a symmetrical
distance of the two clamping claws is 100 to 150 mm.
For a base plate length of 630 and 800 mm use at least six
clamping claws with a distance of 150 mm for the length
630 mm or 200 mm for the length 800 mm to the center of
the vice.
Alignment with alignment pins (1), precision sliding blocks (2) or fitting screws (4).
The base plate is fitted with an interface to attaching the clamping pin for the VERO-S quick-change
palleting system.
The KSX-C2 can also be produced at the factory with customer-specific positioning and fixing
holes as well as with location recesses for various commonly available quick-change palleting
systems.
