_________________________________________________________________________________________
schunk.com
XND.00019.003_A – 10/2018
34
5.2
Cleaning / lubricating the adjustable jaws
Guides and running surfaces of the clamping jaw have
to be regularly cleaned and oiled, e.g. with
MOTOREX Supergliss 68 K to ISO VG 68.
The head support and the thread of the clamping screw
should be lubricated with Molykote grease every 3 to 4
weeks.
Running dry should be avoided as this will reduce the
clamping force.
6
Troubleshooting, eliminating faults
Vice is hard to operate:
Dismantle, clean and damaged surfaces must be carefully levelled off with a honing stone.
7
Assembly drawing
Fixed jaw
Adjustable jaw
Individual parts on request; always state the required jaw width
Pos.
Designation
10
Adjustable jaw
20
Clamping buckle adjustable jaw
30
Locking roller (2x)
40
Wave spring (2x)
50
Cyl. pin spec. Ø5/Ø4 (4x)
60
Cyl. screw M10x45 (2x)
Pos.
Designation
10
Fixed jaw
20
Clamping buckle fixed jaw
30
Locking roller (2x)
40
Wave spring (2x)
50
Cyl. pin spec. Ø5/Ø4 (4x)
60
Cyl. screw M10x25 (2x)
70
Cyl. screw M10x45 (2x)
