_________________________________________________________________________________________
schunk.com
XND.00019.003_A – 10/2018
30
4.2.2
Fixed jaw and adjustable jaw (back H=35 mm)
fixed jaw 40 mm
fixed jaw 65 mm
fixed jaw 90 mm
The back H=35 mm of the fixed jaws / adjustable jaws has a clamping step of H=3 mm.
The clamping area on this step has a "grip" profile for clamping un-machined parts.
A multi-sided jaw configuration can be adapted using the M8 female threads in the face of
the unit.
4.3
Setting up workpiece clamping
4.3.1
Sequence with multiple clamping
Recommended sequence of workpiece clamping.
4.3.2
One-sided workpiece clamping
The workpiece must be covered
by the full width of the
clamping jaw as a minimum.
This prevents excessive twisting
of the components.
