SCHUNK IndraDrive CS Series, Commissioning Instructions

Page: 52 / 64

Commissioning
50 01.00|IndraDrive CS |en
set absolute measurement
This part is only required if Absolute measuring system is used.
(TTK 70)
Fig. 16 Set absolute measurement
1 Select the project explorer via the overview structure:
<IndraDrive> → <Motor, Brake, Measuring System> →
<Motor encoder> → <Reference between the motor encoder>
2 Bring the axis into the desired position and press the button
<Set absolute measurement>.
3 A desired offset shift can be entered in field
<Reference measurement>
3.2.6