SCHUNK HLM 100, Assembly And Operating Manual

Page: 18 / 36

Assembly and Installation
18
02.00 | HLM | Assembly and operating manual | en | 389497
4.2 Air connection
NOTICE
Possible damage to the linear module!
If the module moves too hard against the end positions, the
linear module might be damaged.
•
A linear movement alway must reach the end position without
jerk or bounce.
•
Therefore flow control valves and shock absorbers must be
used,
Setting the speed [
}
19] and Adjustment of the shock
absorber strocke [
}
20].
•
Please observe the diagrams and information in the catalog
pages.
NOTE
• Use connecting wires with the same or a larger cross-section as
the connection thread.
• Observe the air supply requirements Technical Data [
}
15].
NOTICE
Risk of damage to the linear module when changing pressure
medium.
The unit must not under any circumstances be operated with oiled
air before operation with unoiled air (washing out of factory
lubrication.
air connection * HLM 025