General
11.00 | EZN | Assembly and Operating Manual | en | 389068
7
1.6 Accessories
The following accessories, which must be ordered separately, are
required for the product:
• Controller ECM
• Power and sensor cables for variant EZN-S
Contents of the DVD enclosed with the ECM controller:
• "Motion Tool Schunk (MTS)" configuration and commissioning tool
• EEPROM files for the ECM controller
• Assembly and Operating Manual
• FB20 function module for Siemens S7 300/400 for controlling
SCHUNK products
• "Schunk Motion Tool (MTS)" software manual
A wide range of accessories are available for this product
For information regarding which accessory articles can be used
with the corresponding product variants, see catalog data sheet.
