SCHUNK ERT 12, Translation Of Original Operating Manual

Page: 76 / 96

Assembly
76 05.00 | ERT 12 / 50 / 300 | Translation of Original Operating Manual | en | GAS0406665
5 Assembly
5.1 Installing and connecting
WARNING
Risk of injury due to incorrect assembly!
If assembled incorrectly, the product may fall down, causing
severe injuries.
•
Assemble the product with two persons, if necessary use
suitable aids.
•
Observe the specified strength class, tightening torque and
screw-in depth of the screws.
•
Take suitable protective measures to secure the danger zone.
•
Wear suitable protective equipment.
•
Regularly check the fastening of the product.
WARNING
Risk of injury due to unexpected movements!
If the power supply is switched on or residual energy remains in
the system, components can move unexpectedly and cause
serious injuries.
•
Before starting any work on the product: Switch off the power
supply and secure against restarting.
•
Make sure, that no residual energy remains in the system.
NOTE
In order to achieve protection class IP 40, design the connection
structure so that no chips, cooling water, or dirt can enter the
rotary unit's connection area from the machining area.
1. Check the evenness of the mounting surface,
}
5.2.1 [
/
78] .
2. Screw the product to the machine/system, } 5.2.1 [
/
78] .
✓
Make sure that interfaces to attachments are clean and
undamaged.
✓
If necessary, use appropriate connection elements (adapter
plates).
✓
Observe the permissible depth of engagement.
✓
Observe the tightening torque for the mounting screws.