SCHUNK EM310 W180, Assembly And Operating Manual

Page: 23 / 28

Maintenance
06.00 | RM-W | Assembly and Operating Manual | en | 389388
23
7.4 Dismantling the product
NOTICE
A high degree of expertise is required for the disassembly and
assembly of the module,
Personnel qualification [
}
9].
The repair or elimination of defects by the customer on the
module results in the termination of the warranty and liability for
all resulting warranty and subsequent damage.
•
It is recommended to have SCHUNK repair damaged and
defective modules.
WARNING
Risk of injury when the machine/system moves unexpectedly!
Switch off power supply.
• Disassemble the product as shown in the "Assembly drawings",
Assembly drawing [
}
24].
• Only disassemble the product for repair purposes.
7.5 Assembling the product
Maintenance
• Clean all parts thoroughly and check for damage and wear.
• Treat all greased areas with lubricant.
Lubricants/Lubrication points (basic lubrication) [ } 22]
• Oil or grease bare external steel parts.
Assembly
Assembly takes place in the opposite order to disassembly.
Observe the following:
• Unless otherwise specified, secure all screws and nuts with
Loctite no. 243 and tighten with the appropriate tightening
torque.
Select suitable tightening torques for screws when assembling
the product in accordance with generally accepted guidelines
for screw connections.