SCHUNK EM310 W180, Assembly And Operating Manual

Page: 21 / 28

Troubleshooting
06.00 | RM-W | Assembly and Operating Manual | en | 389388
21
6.5 Product rotates abruptly
Possible cause Corrective action
Seals of the drive piston defective. Send product with a SCHUNK repair order or
dismantle product.
Replace the seals of the drive piston.
Positioning of the swivel table defective. Send product with a SCHUNK repair order or
dismantle product.
Compressed air lines blocked. Check compressed air lines of damage.
6.6 Product does not move smoothly to the end positions
Possible cause Corrective action
Fine adjustment of the absorber stroke is
faulty. Adjust absorber stroke., Adjusting the end
positions [ } 16]
Absorber defective. Replace and readjust absorbers., Adjusting
the end positions [ } 16]
Exhaust throttle defective. Replacing the exhaust air throttle.
Speed of rotation too high. Setting the exhaust air throttle.