Start-up
06.00 | RM-W | Assembly and Operating Manual | en | 389388
19
5 Start-up
• Check the technical specifications
14].
• Check the permissible loading specifications (see catalog).
• Do not use the product until trouble-free operation has been
checked taking all permissible operating parameters into
account.
• Set the speed of the movement in such a way that the
permitted swiveling time is not exceeded. Use the "Gemotec
Toolbox" program for calculation (www.schunk.com).
• The movement speed is ideally regulated via throttle check
valves
16]. The speed is always set so that it
starts at a low speed and increases to a higher speed until the
desired operating speed has been reached.
• Operate the device in such a way that the permissible cycle
number per minute is not exceeded. Use the "Gemotec
Toolbox" program for calculation (www.schunk.com).
