Assembly and settings
18
01/ELM/en/2011-07-25/MF-CW
7
Assembly and settings
7.1
Mechanical connection
WARNING
Danger of injury due to unexpected movements of the
machine/system!
Switch off energy supply.
The values refer to the entire bolting surface.
Edge length [mm]
Permissible unevenness [mm]
< 100
< 0,02
> 100
< 0,05
Tab. 14 Requirements for levelness of the bolting surface
Connection geometries are on the base body, on the slide
and on the end plate:
Fig. 1
Connection geometries for ELM 23
Check levelness of
the bolting surface
Mounting
www.comoso.com
