SCHUNK ADR-C, Assembly And Operating Manual

Page: 8 / 32

Basic safety notes
8 02.00 | Jaw turning rings | Assembly and Operating Manual | en | 0189701
2 Basic safety notes
2.1 Intended use
• The product is used for turning or grinding soft and highly
tempered chuck jaws.
• The product may only be used and applied within the scope of
the information in the technical data, } 3 [
/
13] .
• The product may only be used and operated with suitable,
prescribed or approved attachment parts.
• The product is intended for industrial use.
• Appropriate use of the product includes compliance with all
instructions in this manual.
2.2 Inappropriate use
The product is not being used as intended if, for example:
• The product is not clamped correctly.
• Hard chuck jaws must be turned or ground.
• The clamping pins on the product do not fully rest against the
chuck jaws during clamping.
• The information in the technical data is not observed when
using and operating the product } 3 [
/
13] .
• The product is used and operated with non-approved
attachment parts.
• The product is used in corrosive media.
• The maintenance and storage instructions are not
observed
}
7 [
/
28] .
2.3 Constructional changes
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of the
product or damage it.
• Structural changes should only be made with the written
approval of SCHUNK.