Assembly and installation
02.00 | PW V6 | Assembly and operating manual | en | 389670
39
5.7.3 Performing initial commissioning
Example of product window in Windows 7
Initial commissioning of the product can be performed without
any further parameterization.
The status of the product is displayed on the left side of the
product window.
The most important SMP commands can be selected on the right
side of the product window. All other possible SMP commands can
be found under the
Module
menu option.
Procedure for Windows 7
Ø
Click the
Movement
button.
✓
Additional control elements for motion commands are
displayed.
Ø
Click the
Move
button.
✓
The product moves in the defined cycle.
Ø
To test further SMP commands, choose the
Module
option.
