Assembly and installation
22
02.00 | PW V6 | Assembly and operating manual | en | 389670
5 Assembly and installation
WARNING
Risk of injury due to unexpected movements!
If the power supply is switched on or residual energy remains in
the system, components can move unexpectedly and cause
serious injuries.
•
Before starting any work on the product: Switch off the power
supply and secure against restarting.
•
Make sure, that no residual energy remains in the system.
5.1 Mechanical connection
Evenness of the
mounting surface
The values apply to the whole mounting surface to which the
product is mounted.
Requirements for evenness of the mounting surface (Dimensions in mm)
Edge length
Permissible unevenness
< 100
< 0.02
> 100
< 0.05
Choose the installation position so that connection cables are not
damaged or cannot wrap around the product when swiveling.
Ø
Connect the product to the machine/system with screws.
✓
Use suitable connecting elements (adapter plates) if
necessary.
✓
Observe the permissible depth of engagement.
✓
Observe the tightening torque for the mounting screws.
