Retrofit kit for fixed scanner
02.00 | SVP-2D / SVP-2D/H / SVP-4 / SVP-3 | Assembly and Operating Manual | en | 0289052
7
2.3 Assembly
Fastening the fixed
scanner to the
pressure hull of the
SVP
Ø
Fasten Dataman 50S to the bracket using the 2 provided M3
screws.
Holes for indexing pins
(from software version 1.4)
Ø
There are a magnet and two indexing pins at the bracket for
mounting the fixed scanner to the SVP's pressure hull.
Alternatively, the fixed scanner can be mounted on the left or
right side of the pressure hull. For this purpose, there are 4 bore
holes at the SVP's pressure hull.
To attach the holder to the pressure hull, insert the indexing
pins into the holes in the pressure hull.
Ø
Remove the protective film from the scanner.