• 10 •
6.
Connect the battery, following the
precautions listed in sections 6 and 7.
7.
Connect the charger to a live
grounded 120V AC outlet.
8.
The blue
CONNECTED LED will
light, indicating that the charger is
connected to a wireless network.
9.
When charging starts, the green
LED will be solid, and the display
will scroll
“CHARGING”
while the
charger determines that the battery is
properly connected, the condition of
the battery, and whether the battery is
6V or 12V.
10.
Monitor the progress of the charge by
pressing the
display button on
the front of the unit. When the battery is
fully charged, the green
LED
will pulse.
11.
When charging is complete,
disconnect the charger from the AC
power, remove the clamps from the
vehicle’s chassis, and then remove
the clamp from the battery terminal.
Charging a Battery Outside of the Vehicle
1.
Place battery in a well-ventilated area.
2.
Clean the battery terminals.
3.
Connect the battery, following the
precautions listed in sections 6 and 7.
4.
Connect the charger to a live grounded
120V AC outlet.
5.
The blue
CONNECTED LED will
light, indicating that the charger is
connected to a wireless network.
6.
When the charger starts, the green
LED will be solid, and the display
will scroll
“CHARGING”
while the
charger determines if the battery is
properly connected, the condition of
the battery, and whether the battery is
6V or 12V.
7.
Monitor the progress of the charge by
pressing the
display button on
the front of the unit. When the battery is
fully charged, the green
LED
will pulse.
8.
When charging is complete, disconnect
the charger from the AC power,
disconnect the negative clamp,
and finally the positive clamp.
RING TERMINAL QUICK-CONNECT
The ring connectors permanently attach to
the battery, providing easy access to quickly
connect the charger to your battery. This
application is appropriate for motorcycles,
lawn tractors, ATVs and snowmobiles.
1.
To permanently attach to a battery,
loosen and remove each nut from the
bolt at the battery terminal.
IMPORTANT:
Loss of vehicle settings can
occur. Check vehicle owners manual for
specific information.
2.
Connect the red POSITIVE connector
ring to the POSITIVE battery terminal.
3.
Connect the black NEGATIVE connector
ring to the NEGATIVE battery terminal.
4.
Replace and tighten the nuts to secure.
5.
Connect the cable to the end of the
charger output cord. Take care to keep
the wires and plug away from metal
and moving parts.
6.
Plug the charger power cord into a live
grounded 120V AC outlet.
12V ACCESSORY PLUG
QUICK-CONNECT
Charge or maintain your battery without
lifting the hood. NOTE: The charger itself
must be disconnected when the vehicle
is in use.
1.
Connect the end of the 12V accessory
plug quick-connect to the charger.
2.
Insert the 12V accessory plug into the
12V accessory outlet.
3.
Route the power cord from the charger
through the vehicle’s open window.
4.
Plug the charger power cord into a live
grounded 120V AC outlet.
5.
If the vehicle’s ignition key has to be
on in order for the accessory outlet
to supply/receive power, turn the key,
without starting the engine. Consult
your vehicle owners manual for
instructions on how to make the 12V
outlet live, without drawing excessive
power.
AUTOMATIC CHARGING MODE
When an automatic charge is performed,
the charger switches to the maintain mode
automatically after the battery is charged.
