5
Construction and function
5.2
Functional description
30
/80
Table saw BS-350 LST, BS-400 LST-E230, BS-400 LST-E400, BS-500 LST
5.2
Functional description
Depending on the material, the Table saw BS-350 LST, BS-400 LST-E230,
BS-400 LST-E400, BS-500 LST can be used in wet or dry cutting.
The material is clamped on the cutting table.
During operation, the cutting table and material to be cut are manually guid-
ed towards the cutting disc. An electric pump ensures the cooling water sup-
ply during wet cutting. It transports the cooling water from the cooling water
tank directly to the cutting blade. This increases the service life of the cutting
blade and serves to bind dust. The shut-off valve on the blade guard closes
the water supply during dry cutting.
The cutting head is held by a cutting head mount (1). The position of the cut-
ting head can be adjusted via the screw (2) and the catch (3). This allows
the cutting blade to be positioned for full or reduced depth of cut. This guar-
antees a uniform cutting depth over the entire cut.
The cutting head of the Table saw BS-350 LST can be angled by 45° (for
corner cuts).
To tilt the cutting head of the Table saw BS-350 LST loosen the screws (4.1
and 4.2) and tip the cutting head (5) to the desired angle. Use the tools sup-
plied (6) for this.
BS 500 LST
BS 350 LST
1
2
3
4.1
4.2
