Schulthess Bianca 400, Instruction Manual And Installation Instructions

Page: 19 / 36

Operating the appliance
en
19
To continue the program, press the
button Start - Pause
í
.The program
continues automatically.
Notes
■
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
■
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
■
The load display is not active during
reloading.
Changing the programme
1.
Press the Start - Pause
í
button.
2.
Select another program.
3.
Press the Start - Pause
í
button.The new program starts from
the beginning.
Cancel the programme
For programs at high temperature:
1.
Press the Start - Pause
í
button.
2.
To cool down laundry: Select
\
Rinse
.
3.
Press the Start - Pause
í
button.
For programs at low temperature:
1.
Press the Start - Pause
í
button.
2.
Select
0
Spin/Drain//Spin/Empty
`
.
3.
Press the Start - Pause
í
button.
Programme end during rinse
hold
- - - -
0
appears in the display panel and
the indicator lamp of the Start - Pause
í
button flashes.
Continue the program by:
■
Pressing the Start - Pause
í
button
or
■
Selecting a spin speed or setting the
program selector to
0
Spin/Drain//
Spin/Empty
`
and then pressing
the Start - Pause
í
button.
Programme end
End
appears in the display panel and
the indicator lamp of the Start - Pause
í
button is off.
Removing laundry/switching
off the appliance
1.
Open the door and remove the
laundry.
2.
Turn the program selector to
Off
(Off). The appliance is switched off.
3.
Turn off the tap.
Note:
Not required for Aqua-Stop
models.
Notes
■
Do not leave any items of laundry in
the drum.They may shrink in the next
wash or discolour another item.
■
Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■
Wipe the rubber seal dry.
■
Leave the door and detergent
drawer open so that any residual
water can evaporate.
■
Always wait until the program ends,
as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
■
If the display panel goes off at the
end of a program, the energy-saving
mode is active.Press any button to
activate the panel.