Schulthess Bianca 400 Page 3 Instruction Manual And Installation Instructions Download

Page: 3 / 36

Contents

enInstruction Manual and Installation Instructions

Intended use. . . . . . . . . . . . . . . . .4

(

Safety instructions . . . . . . . . . . .5

Electrical safety. . . . . . . . . . . . . . . . . . 5

Risk of injury . . . . . . . . . . . . . . . . . . . . 5

Safety for children. . . . . . . . . . . . . . . . 6

Environmental protection . . . . . .7

Packaging/used appliance . . . . . . . . . 7

Tips on economical use . . . . . . . . . . . 7

Getting to know the appliance . 8

Washing machine . . . . . . . . . . . . . . . . 8

Control panel . . . . . . . . . . . . . . . . . . . 9

Display panel . . . . . . . . . . . . . . . . . . 10

Laundry. . . . . . . . . . . . . . . . . . . .11

Prepare the laundry . . . . . . . . . . . . . 11

Sorting laundry . . . . . . . . . . . . . . . . . 11

Starching . . . . . . . . . . . . . . . . . . . . . 12

Dyeing/bleaching . . . . . . . . . . . . . . . 12

Soaking . . . . . . . . . . . . . . . . . . . . . . 12

Detergent . . . . . . . . . . . . . . . . . .12

Correct selection of detergent . . . . . 12

Saving energy and detergent . . . . . . 13

Programme default settings . . .13

Temperature . . . . . . . . . . . . . . . . . . . 13

Spin . . . . . . . . . . . . . . . . . . . . . . . 14

Delay . . . . . . . . . . . . . . . . . . . . . . . . 14

Additional programme settings15

Speed/Eco . . . . . . . . . . . . . . . . . . . . 15

Easy Iron. . . . . . . . . . . . . . . . . . . . . . 15

Water&Rinse+ . . . . . . . . . . . . . . . . . . 15

Prewash . . . . . . . . . . . . . . . . . . . . . . 15

Operating the appliance . . . . . .16

Preparing the washing machine . . . . 16

Select programme/switch on the

appliance . . . . . . . . . . . . . . . . . . . . . 16

Change the programme default settings

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Select additional programme settings16

Placing laundry into the drum . . . . . .16

Measure and add detergent and care

products . . . . . . . . . . . . . . . . . . . . . .17

Start the programme . . . . . . . . . . . . .18

Childlock . . . . . . . . . . . . . . . . . . . . .18

Adding laundry . . . . . . . . . . . . . . . . .18

Changing the programme . . . . . . . . .19

Cancel the programme . . . . . . . . . . .19

Programme end during rinse hold. . .19

Programme end . . . . . . . . . . . . . . . .19

Removing laundry/switching off the

appliance. . . . . . . . . . . . . . . . . . . . . .19

Sensors . . . . . . . . . . . . . . . . . . . 20

Automatic load sensing. . . . . . . . . . .20

Unbalanced load detection system . .20

VoltCheck . . . . . . . . . . . . . . . . . . . . .20

Setting the signal . . . . . . . . . . . 20

Cleaning and maintenance. . . . 21

Machine housing/control panel . . . . .21

Drum . . . . . . . . . . . . . . . . . . . . . . . . .21

Descaling . . . . . . . . . . . . . . . . . . . . .21

Detergent drawer and housing . . . . .21

Detergent solution pump blocked . . .22

The drain hose at the siphon is blocked

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Filter in the water supply blocked . . .23

Faults and what to do about them.

. . . . . . . . . . . . . . . . . . . . . . . . . . 23

Emergency release . . . . . . . . . . . . . .23

Information on the display panel . . . .24

Faults and what to do about them. . .25

Summary of Contents for Bianca 400





































Search results

Summary of Contents for Bianca 400

Reviews:

Related manuals for Bianca 400

Brands by name

Popular brands

Schulthess Bianca 400, Instruction Manual And Installation Instructions

Search results

Summary of Contents for Bianca 400

Reviews:

Related manuals for Bianca 400

Brands by name

Popular brands