Schulte SDX-102, Operator'S Manual

Page: 40 / 104

ASSEMBLY
SDX-102 05/19 Assembly Section 3-4
© 2019 Alamo Group Inc.
ASSEMBL
Y
10. Measure the distance between the end of the snow blower gearbox shaft and the tractor PTO shaft. At any
point in the lifting cycle the two shaft ends must be withing the limits of the table below.
These dimensions will provide the required joint engagement and also ensure that the universal joint halves do
not jam together. It is possible that the power shaft will be too long for some tractor installations. If the power
shaft is too long, extend the 3-point link arms of your snow blower or consult your dealer for further assistance.
Table 1:
540 RPM 1000 RPM
Minimum 33” (840mm) 30” (760mm)
Maximum 44” (1,115mm) 37” (940mm)
540 RPM
1000 RPM