Schulte GX-150, Operator'S Manual

Page: 56 / 164

OPERATION
GX-150 03/21 Operation Section 4-2
© 2021 Alamo Group Inc.
OPERA
TION
SCHULTE GX-150
ROTARY CUTTER OPERATION INSTRUCTIONS
Schulte GX-150 rotary cutters are manufactured with quality material by skilled workers. These cutters are
designed to cut grass, weeds, crop stalks, brush and other vegetation up to 4” diameter. The cutter is equipped
with protective deflectors and/or chain guards to prevent objects being thrown from the cutter by the blades,
however, no shielding is 100% effective. All shields, guards, deflectors, and chains equipped on the unit must
be maintained on the mower in good operational condition.
It is the operator’s responsibility to be knowledgeable of all potential operating hazards and to take every
reasonable precaution to ensure oneself, others, animals, and property are not injured or damaged by the
cutter, tractor, or a thrown object. Do not operate the cutter if passersby, pets, livestock, or property are within
300 feet of the unit.
•
All THROWN OBJECT SHIELDING
including, Front and Rear Deflectors, Chains Guards, Steel Guards,
Bands, Side Skirts and Skid Shoes in place and in good condition when mowing.
• Mower sections or wing are adjusted to be close and parallel to ground without exposing blades.
•
MOWING AREA
has been inspected and foreign materials and debris have been removed.
• PASSERSBY are inside enclosed vehicle.
This section of the Operator’s Manual is designed to familiarize, instruct, and educate safe and proper cutter
use to the operator. Pictures contained in this section are intended to be used as a visual aid to assist in
explaining the operation of a flex-wing rotary cutter and are not necessarily of a GX-150 cutter. Some pictures
may show shields removed for picture clarity. NEVER OPERATE this implement without all shields in place
and in good operational condition. The operator must be familiar with the cutter and tractor operation and all
associated safety practices before operating the cutter and tractor. Proper operation of the cutter, as detailed in
this manual, will help ensure years of safe and satisfactory use.
IMPORTANT: To avoid mower damage, retorque all bolts after the first 10 hours of operation. Retighten blade
carrier retaining nut on gearbox lower shafts to 600 ft. lbs.
READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS
MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND
IMPLEMENT. If you do not understand any of the instructions, contact your nearest authorized dealer for a
full explanation. Pay close attention to all safety signs and safety messages contained in this manual and
those affixed to the implement and tractor.
OPS-U- 0001
READ, UNDERSTAND, and FOLLOW the following Safety Messages. Death or serious
injury may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards.
(SG-2)