22
4. Accessories.
4.1 Dynamic back and pelvic guide pelotte pads
All back and pelvic guide pelotte pads can
only be used in connection with a holding bra-
cket (see
point 4.7
). For depth adjustment of
the pelotte pad holding bracket, please loo-
sen the screws (
A
) on the right and left-hand
sides of the support under the saddle, and
bring the holding bracket into the required
position. The angular adjustment of the hol-
ding bracket takes place after loosening the
screw (
B
) on the support. The pelotte pads are
adjusted in height after loosening the screw
(
C
) on the respective support.
4.1.1 Width adjustable back and pelvic guide
pelotte pads
For information on the height, angle and
depth adjustment of the back and pelvic gui-
de pelotte pads, see
point 4.1
. The width ad-
justable back and pelvic guide pelotte pads
can be adjusted in width. To do this, loosen
the screws (
D
) on the rear of the back or pelvic
guide pelotte pads and bring them into the
required position.
4.2 Headrest
The headrest can only be used in connecti-
on with a holding bracket (see
point 4.7
) and
is adjustable in height. In order to adjust the
height, loosen the screw (
E
) and bring the
headrest into the required position.
After each adjustment, please re-tighten all
screw connections!
C
A
B
E
D